Refinish Old Wood Table
How to Refinish an Old Wood Table
Overview of the Process
Have an old wood table that needs some love? Refinishing furniture can seem like a daunting task, and maybe even a little intimidating. However, it doesn’t have to be difficult! With the right tools and the right steps, you can make your old table look like new again. Here’s a quick overview of the steps involved in refinishing a wood table:
First, you’ll need to remove the old finish, which can be done with a chemical stripper or a hand sander. Next, you’ll need to sand the wood to prepare it for staining or painting. After that, you’ll need to apply a new finish. Depending on the look you want to achieve, you can use a stain or a varnish. Finally, you’ll need to apply a protective sealant to keep the new finish looking great for years to come.
Gather Your Supplies
Before you start refinishing your table, make sure you have the supplies you’ll need. First, you’ll need some protective gear, such as safety goggles and a face mask. Next, you’ll need some sandpaper in a variety of grits, ranging from coarse to fine. You’ll also need a chemical stripper, a paint brush, a paint roller, a rag, and some wood filler. Finally, you’ll need some wood stain, a varnish, and a protective sealant.
Remove the Old Finish
Once you’ve gathered your supplies, it’s time to start the refinishing process. The first step is to remove the old finish. If you’re using a chemical stripper, make sure to follow the instructions on the package. If you’re using a hand sander, start with a coarse grit sandpaper and work your way up to a fine grit. Be sure to wear your protective goggles and face mask while sanding.
Sand the Wood
Once you’ve removed the old finish, it’s time to sand the wood. Start with a coarse grit sandpaper and work your way up to a fine grit. Be sure to sand in the direction of the grain, not against it. Take your time and make sure you get every nook and cranny. If you find any knots or cracks in the wood, use some wood filler to fill them in.
Apply a New Finish
Once you’ve sanded the wood, it’s time to apply a new finish. You can use a stain or a varnish, depending on the look you want to achieve. To apply the finish, use a paint roller for larger surfaces and a paint brush for smaller, more detailed areas. Once you’ve applied the finish, let it dry for at least 24 hours.
Apply a Protective Sealant
The last step is to apply a protective sealant to your newly refinished table. This will help keep the finish looking great for years to come. To apply the sealant, use a clean rag and rub it into the wood. Once you’ve applied the sealant, let it dry for at least 24 hours before you use the table.
Conclusion
Refinishing an old wood table can seem like a daunting task, but it doesn’t have to be! With the right supplies and the right steps, you can make your old table look like new again. Just remember to wear protective gear, sand the wood, apply a new finish, and apply a protective sealant, and you’ll be well on your way to a beautiful new table.
