How To Refinish Old Desk
How To Refinish Old Desk
Introduction
A refinishing project can be a great way to give a much-needed facelift to an old desk. It’s an easy and affordable way to spruce up your furniture and give it new life. Refinishing an old desk is a project that involves sanding, staining, and sealing the wood to restore it to its former glory. The steps are simple and straightforward, and the process can be completed in just a few hours.
Gather Your Supplies
Before you begin your refinishing project, make sure you have all the supplies you need. You’ll need a sanding block and some sandpaper, a cloth or brush for applying the stain, a brush for applying the sealer, and some wood conditioner. In addition, you’ll also need some mineral spirits, linseed oil, and a tack cloth. You can find these supplies at any home improvement store.
Prepare Your Desk
Once you have all the supplies you need, it’s time to prepare your desk for the refinishing process. Start by removing any hardware, such as knobs, pulls, and handles. These will need to be cleaned and re-installed after the desk is finished. Next, clean the desk thoroughly with a cloth and some mineral spirits. This will remove any dirt and dust that has accumulated on the surface of the desk. Once the desk is clean, it’s time to begin sanding.
Sand and Stain Your Desk
Once the desk is clean and all the hardware is removed, it’s time to begin sanding. Start with a medium grit sandpaper and work your way up to a fine grit. This will remove any imperfections and create a smooth surface. After sanding, you’ll need to apply a wood conditioner to the desk. This will help the wood absorb the stain more evenly. Once the wood conditioner is applied, you can begin staining the desk. Apply the stain in even strokes and wait for it to dry before applying a second coat.
Seal Your Desk
Once the desk is stained, you’ll need to apply a sealer. This will protect the wood from water and other damage. Apply the sealer with a brush and let it dry for at least 24 hours. After the sealer has dried, you can re-install any hardware that was removed. You can also add a few coats of wax to give the desk a glossy finish.
Conclusion
Refinishing an old desk is a great way to give it a new look and make it look like new. The process is simple and straightforward, and the supplies you need can be found at any home improvement store. With a few hours of work and some basic supplies, you can have a beautiful desk that looks like it just came out of the store.
