Refinish Old Metal Lawn Chairs
How to Refinish Old Metal Lawn Chairs
If you have a set of old metal lawn chairs that you’d like to refinish, it’s actually a fairly simple project. With a few basic tools and supplies, you can give your chairs a fresh, new look. The first step is to make sure that the furniture is free of rust. If the chairs have any rust, you’ll need to remove it before you can refinish them. If the rusty areas are small, you can sand or scrape off the rust. If there’s a large area of rust, you may need to use a rust remover.
Gathering the Tools and Supplies
Once you’ve removed any rust, you’ll need to gather the necessary tools and supplies for the project. You’ll need a wire brush, sandpaper, a drop cloth, paint stripper, a paint brush, and the paint or finish of your choice. It’s important to make sure that you have all the supplies and tools you need before you begin the project. This will ensure that you don’t run into any problems and have to stop in the middle of the refinishing process.
Preparing the Chairs
Once you have all the supplies and tools you need, you’ll need to prepare the chairs for refinishing. Start by putting a drop cloth down on the ground. This will help protect the surface you’re working on. Next, use the wire brush to scrape off any loose paint or other debris from the chairs. Once you’ve done that, you can use the sandpaper to sand down the chairs, removing any remaining paint and rust. After you’ve sanded the chairs, use a damp cloth to wipe off any remaining dust.
Stripping the Paint
Once you’ve prepared the chairs, you’ll need to strip off any remaining paint. To do this, you’ll need to use a paint stripper. Make sure to follow the instructions on the paint stripper package. Once you’ve applied the paint stripper, you’ll need to wait for the specified amount of time before you can scrape off the paint. Once the paint has been scraped off, you can use a damp cloth to wipe away any remaining paint stripper.
Applying the Finish
Once you’ve stripped the paint off the chairs, you’re ready to apply the finish. Depending on the type of finish you’ve chosen, you may need to mix it according to the instructions on the package. Once the finish is mixed, you can use a paint brush to apply it to the chairs. Make sure to cover the entire surface of the chairs with the finish. Once you’ve finished applying the finish, allow the chairs to dry according to the instructions on the package.
Finishing Up
Once the chairs have dried, you can use a soft cloth to buff them. This will give them a nice, shiny finish. Once you’ve done that, your chairs are ready to be used. Refinishing old metal lawn chairs is a fairly simple project that can be done in a few hours. With a few basic tools and supplies, you can give your chairs a fresh, new look.
