How To Repair Veneer On Old Furniture
How To Repair Veneer On Old Furniture
Introduction
Veneer is a thin layer of wood that is adhered to a surface, usually a piece of furniture, to give it a more aesthetically pleasing appearance. Although it is a durable material, veneer can chip, crack, and break over time, especially when it is continuously exposed to sunlight. If the veneer on your old furniture is chipped, cracked, or broken, you don’t necessarily have to replace the entire piece. You can repair the veneer yourself with some tools and supplies.
Gather the Tools and Supplies
Before you start repairing the veneer on your furniture, you will need to gather the tools and supplies. You will need a putty knife, a hammer, wood glue, a brush, a cloth, sandpaper, wood veneer, and a wood filler. Make sure you have all the necessary tools and supplies before you begin.
Remove the Damaged Veneer
Once you have all the tools and supplies, you can begin the repair process. Start by using the putty knife to remove any damaged veneer from the furniture. Carefully scrape away the chipped and broken pieces of veneer until the surface is smooth and even. Use the hammer to gently tap the putty knife to ensure that all the pieces of veneer are removed.
Clean the Surface
Once all the damaged veneer is removed, you can clean the surface. Use a cloth to wipe away any dust or debris that may have accumulated on the furniture. Make sure the surface is completely clean before you proceed with the repair.
Apply the Wood Glue
Once the surface is clean and free of debris, you can apply the wood glue. Use the brush to spread the glue in an even layer over the area where you removed the veneer. Make sure the glue covers the entire surface area. Allow the glue to dry completely before you proceed.
Apply the Veneer
Once the glue has dried, you can apply the veneer. Place the veneer over the area where you applied the glue and press it down firmly. Use the hammer to gently tap the veneer into place. Make sure the veneer is firmly attached to the furniture before you proceed.
Sand and Smooth the Surface
Once the veneer is firmly attached, you can sand and smooth the surface. Use sandpaper to sand the area where you applied the veneer. Sand the area until it is smooth and even. Use the wood filler to fill any gaps or cracks in the veneer. Allow the wood filler to dry before you proceed.
Conclusion
Repairing the veneer on old furniture is a fairly simple process. With the right tools and supplies, you can easily repair the veneer on your furniture. Make sure you take your time and follow the steps outlined above to ensure that your repair is successful.
