How To Repair Old Wicker Furniture
How to Repair Old Wicker Furniture
What You Will Need
When it comes to repairing old wicker furniture, there are a few supplies and tools that you will need. Gather these supplies before you start the project. You will need a pair of pliers, a wire brush, a screwdriver, some sandpaper, a drill, some wood glue, and a few other tools. Also, you will need to purchase some new wicker, some new screws, and some wood stain. You will also need some cloth and some furniture polish.
Step 1: Remove the Damaged Pieces
The first step is to remove all of the damaged pieces of wicker. Use a wire brush to brush away any loose pieces of wicker. Then, use a pair of pliers to remove any nails or screws that are holding the old pieces in place. Be careful not to damage the surrounding pieces of wicker. Once you have removed all of the damaged pieces, you can move on to the next step.
Step 2: Sand the Pieces
Once you have removed all of the damaged pieces, you will need to sand the remaining pieces. Use a medium-grit sandpaper to sand away any rough spots. Make sure that you sand in the same direction as the grain of the wicker. This will ensure that the surface is smooth and will help to prevent any further damage. Once you have finished sanding, you can move on to the next step.
Step 3: Drill Holes for the New Pieces
Once you have sanded the pieces, you will need to drill holes for the new wicker pieces. Use a drill and a drill bit that is slightly larger than the screw that you will be using. This will ensure that the screws will fit properly. Drill the holes in the same pattern as the old pieces. Be careful to not drill too deep and to avoid any existing pieces of wicker.
Step 4: Install the New Pieces
Once you have drilled the holes, you can begin to install the new pieces of wicker. Use wood glue to attach the new pieces to the existing pieces. Make sure that you use enough glue to securely attach the pieces. Then, use the screws to secure the pieces in place. Make sure that the screws are tightened securely so that the pieces won’t come loose.
Step 5: Stain and Polish the Furniture
Once the pieces are securely attached, you can begin to stain and polish the furniture. Use a wood stain that is appropriate for the type of wicker that you are using. Make sure that you cover the entire surface and that you allow the stain to dry completely before you continue. Once the stain has dried, you can use a cloth to apply the furniture polish. This will help to protect the wicker and make it shine.
Conclusion
Repairing old wicker furniture can be a rewarding and cost-effective project. With the right tools and supplies, you can make your old wicker furniture look like new again. All you need to do is to remove the damaged pieces, sand the remaining pieces, drill holes for the new pieces, install the new pieces, and then stain and polish the furniture. With a little bit of effort, you can make your old wicker furniture look like new again.
