Refinishing Old Veneer Dresser
Refinishing an Old Veneer Dresser
A Guide to Refinishing an Old Veneer Dresser
Refinishing an old veneer dresser can be a satisfying and rewarding project. It can also be a great way to add value to an older piece of furniture that is still in good condition. The key to refinishing a veneer dresser is to do it properly, in order to protect the veneer and make the dresser look its best.
Step 1: Preparation
The first step in refinishing any piece of furniture is to prepare it for the refinishing process. Begin by removing all hardware from the dresser, such as the drawer pulls and knobs. You will also want to remove any drawers or shelves that may be on the dresser. Once you have removed all of the hardware, you will want to clean the dresser with a damp cloth. To remove any dirt and grime, use a mild detergent and a soft brush. Make sure to dry the dresser completely before beginning the refinishing process.
Step 2: Sanding
Once the dresser has been cleaned, it is time to begin the sanding process. Start by sanding the entire surface of the dresser with a fine-grit sandpaper. Make sure to sand with the grain of the wood in order to achieve a smooth finish. Once you have sanded the entire surface, use a medium-grit sandpaper to remove any remaining dirt and grime. This will help to ensure that the veneer will adhere properly to the dresser.
Step 3: Applying the Veneer
Once the dresser has been sanded, it is time to apply the veneer. Start by applying a thin layer of wood glue to the surface of the dresser. Then, using a roller or brush, apply the veneer to the dresser. Make sure to apply the veneer evenly and press down firmly in order to ensure that the veneer adheres properly. Once the veneer has been applied, allow it to dry completely before proceeding to the next step.
Step 4: Finishing
The final step in refinishing an old veneer dresser is to apply a finish. This can be done with either a polyurethane sealer or a wax. If you choose to use a polyurethane sealer, make sure to apply it in thin coats and allow it to dry completely in between each coat. If you choose to use wax, apply it in thin layers and buff it out with a soft cloth when it has dried. This will give the dresser a glossy, shiny finish.
Conclusion
Refinishing an old veneer dresser can be an enjoyable and rewarding project. But it is important to take your time and do the job properly in order to ensure that the dresser looks its best. Following the steps outlined in this guide will help you to achieve a beautiful, long-lasting finish that will add value to your old dresser.
